Local control
Operator controls integrated into the VFD enclosure.
POLISH MANUFACTURER OF VFDS FOR OEM APPLICATIONS
Dust-resistant VFDs, engineered around your machine.
We design and manufacture compact 230 V VFDs for industrial machinery. Each unit is configured to match the motor, control method and operating environment.
Designed and manufactured in Poland
IP64documented protection rating
230 Vsingle-phase input
0.2–3 kWseries-production range
IP64documented protection rating
1–1000 Hzoutput frequency
Product
One compact module instead of a standard VFD housed in a separate control cabinet
EMFAL drives power 230 V three-phase motors from a 230 V single-phase supply. The IP64 enclosure allows installation close to the machine, while application-specific configuration simplifies commissioning.
Core capabilities
External control
Digital control inputs and a 0–10 V analogue input.
Machine signals
Run and fault outputs for integration with the machine control system.
Protection
Short-circuit, overload and power-stage overtemperature protection.
Power range
Series production of VFDs from 0.2 to 3 kW
We currently manufacture 1.5 and 2.2 kW units most frequently in response to ongoing OEM demand. Lower-power variants from 0.2 kW are not a production limitation — we match the power, configuration and parameters to the motor and actual machine load.
series production
0.2–0.75 kW
Smaller machines and compact drive systems.
frequently produced
1.5 kW
Grinders, pumps, fans and conveyors.
core OEM model
2.2 kW
Our most frequently manufactured variant for OEM customers.
series production
up to 3 kW
Configuration and protection rating are confirmed for the specific application.
Cabling and accessories
A VFD assembly ready to connect to your machine
On request, we install power and motor cables in an agreed length. The assembly can include a 230 V supply cable with a mains plug and a motor cable prepared for connection.
- ✓230 V supply cable with a mains plug
- ✓motor cable sized to the machine layout
- ✓agreed cable terminations and identification
- ✓factory assembly and inspection of the complete set
Cable lengths and EMC requirements are confirmed for the specific application.
For machine manufacturers
Fewer components. Simpler installation. Direct support from the manufacturer.
Motor-matched configuration
We configure the speed range, acceleration and deceleration ramps, and control method for the machine.
Integration without an extra cabinet
A compact enclosure can reduce cabling, glands and mounting components.
Commissioning support
We work with your engineer to define the connections, EMC requirements and commissioning procedure.
Series production
Once the sample unit is approved, we maintain the agreed configuration across future deliveries.
Custom manufacturing
A VFD configured for the way your machine operates
After reviewing the motor parameters and duty cycle, we prepare an application-specific VFD configuration and operator control arrangement.
Check the fit for your machine→- ✓operating parameters and frequency range
- ✓button layout and external control
- ✓run and fault indication
- ✓markings and private-label versions
- ✓mounting arrangements, cables and connectors
- ✓machine-integration documentation
Documents
Information for VFD assessment and selection
Start with the capability overview. When requesting documentation, include the model or motor data so we can identify the configuration and information needed for integration.
How an OEM project starts
Machine data
We review the motor, voltage, load and operating environment.
Configuration
We select the VFD, control method and installation requirements.
Sample units
We test one or two units in the intended machine.
Series supply
We provide the approved configuration for subsequent OEM orders.
Before your first order
We agree the configuration and commercial terms for the specific machine. These points help you prepare the discussion and assess the quotation.
A unit for testing
We start with selection and tests in the intended machine. The number of units, price and test scope are agreed before ordering.
Quotation and deliveries
Include the expected quantity and required date in your enquiry. Price, lead time and series-supply terms need confirmation in the quotation.
Support and service
Contact EMFAL directly about the VFD. Have the device identification and a description of the issue ready. Warranty terms and the scope and procedure of service are agreed for the delivery.
Contact
Check the fit for your machine
Describe your machine. We will assess whether an EMFAL VFD may fit and identify the information needed for selection. You do not need a finished configuration.
- Machine and operating cycle
- Motor power, voltage and nameplate photo
- Machine supply and control method
- Expected quantity and required date
The button opens your email app with a checklist to complete. Attach the nameplate photo to the message. If you do not use an email app, write to emfal@emfal.pl or call us.
Jan Ścisłowicz
EMFAL sp. z o.o.
emfal@emfal.pl+48 573 935 143ul. Władysława Orkana 13C34-404 Pyzówka, Poland
Custom electronics
Control systems engineered from concept to production
We develop complete control devices for machine manufacturers and technical installations. The scope can include electronics, PCB design, embedded software, operator interface, prototyping, enclosure design, validation and series production.
The controller shown here is a flexible platform developed for a range of applications, including air-handling units, thermal-facility plant rooms and custom automation systems.
- ✓air-handling units and HVAC systems
- ✓plant rooms and technical installations
- ✓machinery and custom control systems
About EMFAL
A specialised manufacturer providing responsive, application-specific engineering
EMFAL designs and manufactures VFDs for compact industrial machines. We work directly with machine engineers and business owners, combining expertise in electronics and drive control with practical experience in series production.
Documents